NetComm IP DSLAM - Manual (Page 55)

NetComm NCT240 Management Guide Release 1.0
SWITCH:
This chapter will guide user how to configure the NCT240 switch features.
help Display command list
? Display command list
queuemap The system's priority level to physical queue mapping
vlan Setting VLAN
portvlan Setting port based vlan group
mac
8021_x 802_1x protocol settings
igmpsnoop igmp configuration
dhcprelay
eth The Ethernet port settings
looptest The loop setting
exit Return to upper level
switch command list
Queuemap
This command display system related physical queue map and set a degree to a
physical queue.
Syntax: queuemap <show | set <priority> <queue>>
Command usage:
BAS/switch>queuemap
The system's priority level to physical queue mapping
Usage:
queuemap <show| set>
show Display the system's priority level to physical queue mapping.
set Map a priority level to a physical queue.
queuemap command
54