NetComm IP DSLAM - Manual (Page 57)

NetComm NCT240 Management Guide Release 1.0
802.1x
Syntax: 802_1x <show|portmode|enable|disable|portenable|portdisable|config|timer>
¾ show - Display IEEE 802.1X settings.
¾ Enable - Enable 802.1x protocol
¾ disable - Disable 802.1x protocol
¾ portmode - Set portmode on special ports
¾ portenable - Turn on IEEE 802.1X on special ports.
¾ Portdisable - Turn off 802.1X on special ports.
¾ Config - config radius settings.
¾ timer - timer set of 802.1X protocol.
Command usage
802_1x <show|portmode|enable|disable|portenable|portdisable|config|timer>
802_1x show <port range>
802_1x <enable>
802_1x <disable>
802_1x portmode <portlist> <portmode>
802_1x portenable <port range>
802_1x portdisable <port range>
802_1x config <radiusserverIP> <serverport> <authport> <NasIP>
<aucNasIdentifier> <sharedkey>
802_1x timer <quietPeriod> <txPeriod> <suppTimeout>
<serverTimeout> <reAuthMax reAuthPeriod>
IGMP snooping
Syntax: igmpsnoop <show|set|enable|disable|fastleave>
¾ show - Display the IGMP snooping setting.
¾ set - Set the IGMP snooping VPI/VCI/VID/PRI.
¾ enable - Turn on IGMP snooping.
¾ disable - Turn off IGMP snooping.
¾ fastleave - onfig IGMP fastleave settings.
¾ Showentry - show the igmp table entry.
56