NetComm IP DSLAM - Manual (Page 48)

NetComm NCT240 Management Guide Release 1.0
ADSL:
This chapter explains how to configure NCT240 system’s ADSL ports. It also
covers how to configure virtual channels and virtual channel profiles.
A profile is a table that contains a list of pre-configured ADSL settings. Each
ADSL port has one profile assigned to it. The profile defines the latency mode and
upstream/downstream latency delay maximum and minimum upstream/downstream
rates, the target upstream/downstream signal noise margins, and the maximum and
minimum upstream/downstream acceptable noise margins of all the ADSL ports that
have this profile. You can configure multiple profiles, including profiles for
troubleshooting.
help Display command list
? Display command list
enable Turn on the specified ADSL ports
disable Turn off the specified ADSL ports
profile Display, create, modify, delete, or copy an ADSL line profile
name Set the name of the port
linediag set,get line diagnostics
vcprofile display, create, modify, delete a virtual channel profile
alarmprofile Display, create, modify, delete, or copy an ADSL line alarmprofe
pvc Display, create, modify, and remove a PVC setting
exit Return to upper level
adsl command
Enable
Syntax: enable <port>
¾ enable an ADSL port
47