NetComm IP DSLAM - Manual (Page 46)

NetComm NCT240 Management Guide Release 1.0
Command usage:
¾ set date use this format yyyy:mm:dd
BAS/sys>date
The system's current date
Usage:
date <show| set>
show Display the system's current date.
set Set the system's date.
date command
Timeserver
This command can display and use system’s time server.
Syntax: timeserver <show | set>
¾ show – display system’s time server
¾ sync – retrieves the date and time from the timeserver
BAS/sys>timeserver
Usage:
timeserver <show|sync|setting>
show Display the system's time server.
sync Retrieves the date and time from the timeserver.
setting Set the IP of timeserver,Set the periods of sync.
timeserver command
45