NetComm IP DSLAM - Manual (Page 58)

NetComm NCT240 Management Guide Release 1.0
Command Usage:
igmpsnoop <show|set|enable|disable|fastleave>
igmpsnoop <show>
igmpsnoop set <VPI(0~4095)> <VCI(0~65535)> <VID> <Priority>
igmpsnoop <enable> Turn on IGMP snooping.
igmpsnoop <disable>
igmpsnoop fastleave <enable>|<disable>
igmpsnoop <showentry>
DHCP relay, option 82
Syntax:
dhcprelay <show|enable|disable|server>
¾ show - show settings and status of dhcp relay.
¾ enable - Turn on DHCP relay option 82.
¾ disable - Turn off DHCP relay option 82.
¾ server - Set a DHCP server IP address .
Command usage:
dhcprelay <show|enable|disable|server>
dhcprelay <show>
dhcprelay <enable>
dhcprelay <disable>
dhcprelay server <ip:xxx:xxx:xxx:xxx>
Eth
Syntax: eth <show| speed| enable| disable>
¾ show – display the Ethernet port settings
¾ speed – set the Ethernet port(s) connection speed
¾ enable – Turn on the specified Ethernet port
¾ disable – Turn off the specified Ethernet port
57