National Instruments 6508 PCI-DIO-96 - Manual (Page 17)

Chapter 1 Introduction
© National Instruments Corporation 1-5 PCI-DIO-96 User Manual
Optional Equipment
National Instruments offers a variety of products to use with your
PCI-DIO-96 board, including cables, connector blocks, and other
accessories, as follows:
• Cables and cable assemblies
• Connector blocks, 50-pin screw terminals
• SCXI modules and accessories for isolating, amplifying, exciting,
and multiplexing signals for relays and analog output. With SCXI
you can condition and acquire up to 3,072 channels.
• Low channel count signal conditioning modules, boards, and
accessories, including conditioning for strain gauges and RTDs,
simultaneous sample and hold, and relays
For more information about optional equipment available from
National Instruments, refer to your National Instruments catalog or call
the office nearest you.
Custom Cabling
National Instruments offers cables and accessories for you to prototype
your application or to use if you frequently change board
interconnections.
If you want to develop your own cable, the mating connector for the
PCI-DIO-96 is a 100-position, right-angle receptacle without board
locks. Recommended manufacturer part numbers for this mating
connector are as follows:
• AMP Corporation (part number 749076-9)
• Honda Corporation (part number PCS-XE100LFD-HS)