Nortel Networks 4065R - Manual (Page 16)

Handset controls
16
In the idle state, the display shows the name of the DECT system, the
programmed user name (as you entered it, see page 73), the internal
telephone number (if programmed).
During a call the display is updated with the caller line IDs and/or calling
party name display (CPND), and call duration timer.
While browsing in menus, menu options (for example, caller filter) and the
features menu are displayed as a three-line list. If more than three lines of
information are available, the lines can be scrolled up or down using the
arrow
keys. Selectable entries are shown with a dark background.
Symbols can also appear in this area of the display. For example, when
Caller Filter is active, the
t
symbol appears in the center of the third row
of the Text/Information area of the display.
Soft key line
Soft keys are located below the Information/Text line.The functions
allocated to the keys are shown on the bottom line of the display. The key
functions change automatically according to the operation state of the
handset.
Menu soft key
Press the Menu soft key to activate a menu of relevant operations; the
contents of this menu depends on the state of the handset. Short-press
the
Menu
soft key to activate the shortcut menu (refer to “Menu
Shortcuts” on page 20).
Arrow soft keys
Symbols displayed above the
arrow
keys (
N
) identify the respective
functionality of the
arrow
keys:
When the Telephone Book icon is displayed, press the
arrow
keys to select numbers from the Telephone Book.
When entering telephone numbers and names, press the
arrow
keys to move the cursor keys left or right.
When a selection list (such as Telephone Book or Menu)
is displayed, press the
arrow
keys to move the cursor to
the desired entry.
b
c
a