Nortel Networks 4065R - Manual (Page 51)

Using the Caller Filter list
51
Editing entries in the Caller Filter list
To edit existing entries in the Caller Filter list:
4. Press the
arrow
keys to scroll and highlight the
New
option, and press the
OK
soft key
5. Use the
dialpad
to enter the telephone number.
— Move the cursor using the
arrow
(
c
) keys. New
digits and characters are added in front of the
flashing cursor.
— Press the right soft key (
&
) to delete individual
digits or characters from the number.
— Press the
OK
soft key if you do not want to
change a phone number or name.
— Long-press the right soft key (
&
) to exit without
making any changes.
Note 1: Numbers can consist of a maximum of 32
characters. Names can consist of a maximum of 16
characters.
Note 2: One or more asterisks (**) can be entered at
the end of a number to filter all numbers that begin
with the specified sequence. For example: Enter
123* to filter numbers 1230-1239. Enter 123** to filter
numbers 12300-12399.
6. Use the
dialpad
to enter the name, using the same
keys and controls you used to edit the telephone
number.
7. Press the
OK
soft key.
8. Press the
Esc
soft key one or more times to return to
the idle display.
1. Open the
Caller Filter
menu as discussed in “To
open the Caller Filter menu:” on page 50.
N
New
OK
d
d
OK
Esc