Nortel Networks 4065R User Manual
Page 72
Configuring DECT system information
72
Note: If your handset is preinstalled by your supplier, you need not
subscribe to a system. If the handset is not subscribed to any
systems, it displays the message
No Subscription.
The handset can be subscribed to up to ten different communications
systems, for which it stores a subscription record. Each subscription
record includes a name; whenever the handset enters the range of a
DECT system, this name appears in the handset display.
Before you subscribe to a DECT system, acquire the following information
from your system administrator:
•
PARK code. Use a PARK code system ID only if more than one
DECT systems overlap in your location.
•
Authorization code. Use this code (PABX-PIN) to register the handset
with the DECT system.
•
DECT system name. The name of the system to which you are
subscribing. Once entered, it appears on the idle display. For more
information concerning the entry of numbers, see “Dialpad layout” on
page 36.
•
Local phone number assigned to your DECT handset.
1.
Access the
System
menu as shown in “Accessing
2.
Press the
arrow
keys to scroll and highlight the
Subscription
option, and press the
OK
soft key.
3.
Press the
Options
soft key.
4.
Press the
arrow
keys to scroll and highlight the
New
option, and press the
OK
soft key.
5.
Press the
OK
soft key to confirm the International
Portable Equipment Identity (IPEI) display.
N
Subscription
OK
Options
N
New
OK
OK