Nortel Networks 4065R - Manual (Page 63)

Telephone Options
63
• Delay timer — The Delay time is the time that must elapse before
mandown is activated. During this time the handset display remains
in normal mode. There is no alert/attention tone. If the handset
returns to the vertical position during this time, the Delay timer is de-
activated.
Once the Delay timer has expired, the Pre-alarm timer begins.
• Pre-alarm timer — The Pre-alarm timer can be cancelled by pressing
the Esc soft key. The Pre-alarm timer is not cancelled if you return the
handset to an upright position. The Pre-alarm timer produces an
audible beep.
• Repeat timer — If the handset is placed in a horizontal position while
a call is established, the phone does not initiate the Mandown call
unless a text message is configured. If no text message is configured,
the phone initiates a Mandown call when the call ends, after the
Repeat timer expires. Press the
Esc
soft key to cancel the Repeat
timer. The Repeat timer is silent.
Note: If no Pre-alarm timer value has been configured, the Mandown
call is initiated when the Delay timer reaches zero.
To configure Mandown Call:
1. Access the
Telephone Options
menu as described
in “Accessing the Telephone Options menu:” on
page 59.
2. Press the
arrow
keys to scroll and highlight the
Mandown Call
option.
3. Press the
OK
soft key.
N
Mandown Call
OK