Nortel Networks 4065R - Manual (Page 73)

Configuring DECT system information
73
You can now use the handset to make and receive calls.
Manually selecting the DECT system
If the handset is subscribed to several DECT systems, use this option to
select which system the handset uses.
6. Use the dialpad to enter the PARK code at the
PARK
prompt and press the
OK
soft key.
Note: Use a PARK code system ID only if more than
one DECT systems overlap in your location. If only
one DECT system is available, make no entry and
press the
OK
soft key.
7. Use the dialpad to enter the PIN (authentication
code) at the
PIN
prompt and press the
OK
soft key.
8. Use the dialpad to enter the System Name at the
Enter name
prompt and press the
OK
soft key.
9. Use the dialpad to enter the phone number assigned
to your handset at the
Enter Number
prompt and
press the
OK
soft key.
10. Press the
Esc
soft key one or more times to return to
the idle display.
1. Access the
System
menu as shown in “Accessing
the System menu:” on page 71.
2. Press the
arrow
keys to scroll and highlight the
Subscription
option, and press the
OK
soft key.
3. Press the
arrow
keys to scroll and highlight the
system name.
4. Press the
Options
soft key.
d
OK
d
OK
d
OK
d
OK
Esc
N
Subscription
OK
N
Options