Nortel Networks 4065R - Manual (Page 22)

Calling features
22
To edit a number in predial mode:
Note: When predialling, if the input cursor is positioned after the
telephone number, the new digits are inserted at the end of that
telephone number. If the input cursor is positioned at any other point,
the new digits are inserted in front of the insertion point.
Using Quick Call
Use the Quick Call feature to place calls by dialling a one-digit code.
Using Handsfree
To enable several people in a room to listen to a call, the handset
includes a Handsfree feature.
1. Use the
arrow
keys to position the insertion point.
2. Use the dialpad to enter the new digits.
Note 1: Press the right soft key ( &
) to delete
individual digits.
Note 2: Long-press the right soft key ( &
) to cancel
predialling.
3. Press the
Hook
key to dial.
1. Long-press the number key assigned to the phone
number.
2. Press the
Hook
key to dial the number.
Note: If Auto Quick Hook is enabled, you do not
need to press the Hook key. To enable Auto Quick
Hook, see page 66. See Page 43 for information
about assigning one-digit codes.
1. Long-press the
Handsfree
key before or during a
call.
2. Use the dialpad to enter the phone number.
N
d
:
d
O
d