National Instruments NI 6014 - Manual (Page 108)

Index
© National Instruments Corporation I-7 NI 6013/6014 User Manual
single-ended connections, 4-14 to 4-16
grounded signal sources (NRSE
configuration), 4-15 to 4-16
when to use, 4-14
SISOURCE signal, 4-29
software installation, 2-1
software programming choices, 1-2 to 1-4
National Instruments ADE software,
1-3 to 1-4
NI-DAQ driver software, 1-2 to 1-3
specifications
analog input, A-1 to A-4
accuracy information, A-2
amplifier characteristics, A-3
dynamic characteristics, A-3 to A-4
input characteristics, A-1 to A-2
stability, A-4
transfer characteristics, A-2 to A-3
analog output, A-4 to A-6
accuracy information, A-5
dynamic characteristics, A-6
output characteristics, A-4
stability, A-6
transfer characteristics, A-5
voltage output, A-5 to A-6
calibration, A-8
digital I/O, A-6 to A-7
electromagnetic compatibility, A-9
environment, A-9
maximum working voltage, A-9
physical, A-8
power requirement, A-8
safety, A-9
timing I/O, A-7
triggers, A-8
digital trigger, A-8
STARTSCAN signal
DAQ timing connections, 4-25 to 4-26
questions about, C-5
T
technical support and professional
services, D-1
timing connections, 4-19 to 4-40
DAQ timing connections, 4-21 to 4-30
AIGATE signal, 4-28
CONVERT* signal, 4-27 to 4-28
EXTSTROBE* signal, 4-30
SCANCLK signal, 4-29 to 4-30
SISOURCE signal, 4-29
STARTSCAN signal, 4-25 to 4-26
TRIG1 signal, 4-22 to 4-23
TRIG2 signal, 4-23 to 4-24
typical posttriggered acquisition
(figure), 4-21
typical pretriggered acquisition
(figure), 4-22
general-purpose timing signal
connections, 4-34 to 4-40
FREQ_OUT signal, 4-40
GPCTR0_GATE signal, 4-35
GPCTR0_OUT signal, 4-35 to 4-36
GPCTR0_SOURCE signal, 4-34
GPCTR0_UP_DOWN signal, 4-36
GPCTR1_GATE signal, 4-37 to 4-38
GPCTR1_OUT signal, 4-38
GPCTR1_SOURCE signal,
4-36 to 4-37
GPCTR1_UP_DOWN signal,
4-38 to 4-40
overview, 4-19 to 4-20
programmable function input
connections, 4-20 to 4-21
timing I/O connections (figure), 4-20
waveform generation timing connections,
4-31 to 4-34
UISOURCE signal, 4-33 to 4-34
UPDATE* signal, 4-32 to 4-33
WFTRIG signal, 4-31 to 4-32