Figure 3-7. inside-region analog triggering mode, Figure 3-8. high-hysteresis analog triggering mode, Figure 3-9. low-hysteresis analog triggering mode – National Instruments NI PCI-6110 User Manual
Page 26
Advertising
Chapter 3
Hardware Overview
© National Instruments Corporation
3-7
Figure 3-7. Inside-Region Analog Triggering Mode
In high-hysteresis analog triggering mode, the trigger is generated when the
signal value is greater than highValue, with the hysteresis specified by
lowValue, as shown in Figure 3-8.
Figure 3-8. High-Hysteresis Analog Triggering Mode
In low-hysteresis analog triggering mode, the trigger is generated when the
signal value is less than lowValue, with the hysteresis specified by
highValue, as shown in Figure 3-9.
Figure 3-9. Low-Hysteresis Analog Triggering Mode
highValue
Trigger
lowValue
highValue
Trigger
lowValue
highValue
Trigger
lowValue
Advertising
This manual is related to the following products: