National Instruments NI PCI-6110 - Manual (Page 76)

Appendix A Specifications
NI PCI-6110/6111 User Manual A-6 ni.com
Current drive...........................................±5 mA min
Output stability .......................................Any passive load
Protection................................................Short-circuit to ground
Power-on output voltage.........................0, ±400 mV (before software
loads calibration values)
Dynamic Characteristics
Settling time and slew rate
Noise .......................................................1 mV
rms
, DC to 5 MHz
Spurious free dynamic range ..................75 dB, DC to 10 kHz
Glitch energy ..........................................±30 mV for 1
µs
Stability
Offset temperature coefficient ................±500
µV/°C
Gain temperature coefficient
Internal reference.............................±50 ppm/°C
External reference............................±25 ppm/°C
Onboard calibration reference
Level ................................................5.000 V (±2.5 mV)
(actual value stored in EEPROM)
Temperature coefficient...................±2.0 ppm/°C max
Long-term stability ..........................±6 ppm/
Digital I/O
Number of channels................................8 input/output
Compatibility ..........................................TTL/CMOS
Settling Time for Full-Scale Step Slew Rate
300 ns to ±0.01% 300 V/
µs
1,000 h