Basic camera setup, Setup menu, A167) – Nortel Networks COOLPIX P7000 User Manual
Page 181: Tup menu (a167), A167) f, Tup menu (a167, A167) t, Tup menu
167
Basi
c Came
ra Setup
Basic Camera Setup
Setup Menu
The setup menu contains the following options.
Welcome screen
Choose whether or not to display the welcome screen on the monitor when the camera is
turned on.
Date
Set camera clock and choose home and destination time zones.
Monitor settings
Set the picture display after shooting, the screen brightness, and the display options when
the monitor is turned on.
Date imprint
Imprint date and time of recording on pictures.
Vibration reduction
Set the vibration reduction for taking still pictures and movies.
Motion detection
Enable motion detection to reduce the effects of camera shake and subject movement
when shooting still pictures.
AF assist
Enable or disable AF-assist illumination.
Red-eye reduction
Choose the red-eye reduction method when the flash mode is auto with red-eye
reduction.
Digital zoom
Enable or disable the digital zoom.
Zoom speed
Set the zoom operation speed.
Sound settings
Adjust sound settings.
Record orientation
Set whether or not to record the orientation data with the picture when shooting.
Auto off
Set the time before the camera enters standby mode to save power.
Format memory/Format card
Format the internal memory or memory card.
Language
Choose the language used by the camera monitor display.
TV settings
Adjust the settings for connecting to a TV.
Built-in ND filter
Set whether or not to use the camera’s built-in ND filter to reduce the light when the
shooting mode is
A, B, C, D, E, F, N or O (low noise night).