Nortel Networks COOLPIX P7000 - Manual (Page 193)

179
Setup Menu
Basi
c Came
ra Setup
Zoom Speed
Set the zoom operation speed. Slow down the zoom speed to minimize the
recording of the zoom operating noise during movie recording.
The zoom speed setting is shown by an icon displayed on the monitor during
shooting (
A6). At settings other than Auto, the icon for the current setting is
displayed on the monitor.
Sound Settings
Adjust the following sound settings.
Press the d button M z (Setup menu) (A168) M Zoom speed
Auto (default setting)
During still picture shooting, operate the zoom at the Normal speed. During movie
recording, operate the zoom at a lower speed than Normal to minimize the
recording of the zoom operating noise. During still picture shooting, rotating the
zoom control all the way in either direction adjusts the zoom quickly, while rotating
the control partially adjusts the zoom slowly.
Normal
During both still picture shooting and movie recording, operate the zoom at the
standard speed. During both still picture shooting and movie recording, rotating
the zoom control all the way in either direction adjusts the zoom quickly, while
rotating the control partially adjusts the zoom slowly.
Quiet
During both still picture shooting and movie recording, operate the zoom at a
lower speed than Normal.
Press the d button M z (Setup menu) (A168) M Sound settings
Button sound
Turn the beep and start-up sounds On (default setting) or Off. The beep sounds
once when the settings are completed successfully, twice when the camera
focuses on the subject, and three times when an error is detected.
Shutter sound
Choose whether to set the shutter sound to On (default setting) or Off.
• Even when On is set, the shutter sound is not made during continuous shooting
or movie recording.