Nortel Networks COOLPIX P7000 User Manual

Page 228

Advertising

214

Troubleshooting

ical
No

s an

d I
n

de
x

Randomly spaced
bright pixels
(“noise”) appear in
image.

As the subject is dark, shutter speed is too slow or ISO
sensitivity is too high.
• Use flash.
• Specify a lower ISO sensitivity setting.
• Apply Long exposure NR in the shooting menu to suit

situations.

• Use a scene mode which has noise reduction.

32
74
103

Pictures are too
dark
(underexposed).

• Flash is set to W (Off).
• Built-in flash window is blocked.
• Subject is beyond flash range.
• Adjust exposure compensation.
• Raise the ISO sensitivity.
• Subject is backlit. Raise the built-in flash, and set the scene

mode to Backlighting or set the flash mode to X (fill flash).

• On is selected for Built-in ND filter in the setup menu.

32
26
32
43
74
32, 55

184

Pictures are too
bright
(overexposed).

• Adjust exposure compensation.
• Use Built-in ND filter setting in the setup menu.

43
184

Unexpected results
occurred when
flash is set to auto
with red-eye
reduction.

When V (Auto with red-eye reduction) or “fill flash with
slow sync and red-eye reduction” of the Night portrait
scene mode is applied during shooting, In-Camera Red-Eye
Fix may, in very rare cases, be applied to areas not affected by
red-eye. Set a flash mode other than V (Auto with red-eye
reduction), select a scene mode other than Night portrait,
and resume shooting.

32, 49

Skin softening
results are not as
expected.

• Skin softening may not produce the desired results

depending on shooting conditions.

• For pictures with four or more faces, try using Skin

softening in the playback menu.

139

Saving images
takes time.

It may take more time to save images in the following
situations.

• When the noise reduction function is in operation
• When flash is set to V (

Auto with red-eye reduction

)