Nortel Networks COOLPIX P7000 User Manual
Page 222
208
Error Messages
T
e
ch
n
ical
No
te
s an
d I
n
de
x
N
Press the flash pop-up
button to raise the flash.
The built-in flash is
lowered when the
scene mode is Night
portrait or
Backlighting, or the
Continuous mode is
Continuous flash.
Press the
K (flash pop-up) button
to raise the built-in flash.
N
The flash is lowered.
The built-in flash is not
raised during the
scene auto selector
mode.
Press the
K (flash pop-up) button
to raise the built-in flash. The camera
can still shoot normally with the flash
lowered if you do not wish to use it.
P
Speedlight setting error
Group A has not been
selected for group
setting when shooting
using wireless lighting.
Set the group setting of the master
commander and remote flash to
Group A.
Q
Lens error
Lens is not operating
properly.
Turn camera off and then on again. If
error persists, contact retailer or
Nikon-authorized service
representative.
P
Communications error
Error occurred during
communication with
printer.
Turn off camera and reconnect cable.
System error
Q
Error has occurred in
camera’s internal
circuitry.
Turn off camera , remove and reinsert
battery, and turn on camera. If the
error persists, contact retailer or
Nikon-authorized service
representative.
Q
Initializing lens. Cannot
focus.
The camera cannot
focus.
Wait until the camera recovers
automatically.
–
Display
Description
Solution
A