Ricoh Aficio LD215c - Manual (Page 10)

2
Display Panel
This section describes configuration using the display panel when the printer
function is selected.
1. Operational status or messages
Displays current machine status, such as
“Ready”, “Offline”, and “Printing...”.
2. [JobReset]
Press to cancel the current print job. If
you press it when the machine is offline
and Hex Dump is selected, Hex Dump is
canceled.
3. [Prt.Jobs]
Press to display print jobs sent from a
computer.
4. [Menu]
Press to display the menu to select the
following options:
• [Show Error Log]
Displays the error logs of print jobs
that are sent from a computer.
• [Form Feed]
Prints all the data left in the machine's
input buffer.
Note
❒ When the power is turned on, the copier display is shown. This is a factory
default. This initial setting can be changed. See “System Settings”, General
Settings Guide.
AMO200S