Ricoh Aficio LD215c - Manual (Page 113)

Printing from the Print Job Screen
105
3
Printing a Stored Print File
The following procedure describes how to print a Stored Print file with the PCL
6 / 5c and the RPCS printer driver. For information about how to print a Stored
Print file with the PostScript 3 printer driver, see Postscript 3 Supplement in-
cluded.
Important
❒ Applications with their own drivers, such as PageMaker, do not support this
function.
❒ If you are using Mac OS X, you need Mac OS X v10.2 or higher to use this
function.
A
Configure Stored Print in the printer driver’s properties.
You can select two ways for Stored Print:
• [Stored Print]
Stores the file in the printer and print it later using the control panel.
• [Store and Normal Print]
Prints the file at once and also stores the file in the printer.
For details about configuring the printer drivers, see the relevant Help files.
B
Click [Details...], and then enter a User ID in the [User ID:] box.
You can also set a password. The same password must be entered when print-
ing or deleting.
You can set a file name. The file name you set will be displayed on the ma-
chine's Job List screen.
C
Start printing from the application’s [Print] dialog box.
The Stored Print job is sent to the machine and stored.
D
On the machine’s control panel, press the {Printer} key to display the print-
er screen.
E
Press [Prt.Jobs].