Ricoh Aficio LD215c - Manual (Page 41)

Installing the Printer Driver
33
1
F
Select the printer driver you want to use in the [Select Program] dialog box.
You can select several printer drivers.
G
Click [Next >].
H
Select the machine model you want to use.
The printer name can be changed in the [Change settings for 'Printer Name'] box.
I
Double-click the printer name to display the printer settings.
The details shown in [Comment:], [Driver:], and [Port:] vary depending on the
operating system, printer model, and port.
J
Click [Port:], and then click [Add].
K
Click [SmartDeviceMonitor], and then click [OK].
L
Click [TCP/IP], and then click [Search].
A list of printers using TCP/IP appears.
M
Select the printer you want to use, and then click [OK].
Only printers that respond to a broadcast from the computer appear. To use
a machine not listed here, click [Specify Address], and then enter the IP address
or host name of the machine.
N
Check that the port of the selected printer is displayed in [Port:].
O
Set a user code, if necessary.
Up to 8 numeric characters can be entered. No alphabetic character or symbol
can be entered.
P
Select the [Default Printer] check box to configure the printer as default.
Q
Click [Continue].
Installation starts.
R
After the installation is completed, select one of the options to restart the
computer either now or later, and then click [Finish].
Restart the computer to complete installation.
Note
❒ Setting a user code allows a SmartDeviceMonitor for Admin user to dis-
play and check statistics about the number of sheets which each user
prints. For details, see SmartDeviceMonitor for Admin Help.
❒ Auto Run may not work with certain operating system settings. If this hap-
pens, launch “Setup.exe” on the CD-ROM root directory.
❒ Under Windows 95 / 98 / Me, you cannot add an IP address partially sim-
ilar to the one already used. For example, if “192.168.0.2” is in use,
“192.168.0.2xx” cannot be used. Similarly, if “192.168.0.20” is in use,
“192.168.0.2” cannot be used.