Printing a sample print file – Ricoh Aficio LD215c User Manual
Page 102
Other Print Operations
94
3
Printing a Sample Print File
The following procedure describes how to print a Sample Print file with the PCL
6 / 5c and the RPCS printer driver. For information about how to print a Sample
Print file with the PostScript 3 printer driver, see PostScript 3 Supplement.
Important
❒ Applications with their own drivers, such as PageMaker, do not support this
function.
❒ If you are using Mac OS X, you need Mac OS X v10.2 or higher to use this
function.
A
Configure Sample Print in the printer driver's properties.
For details about configuring the printer drivers, see the relevant Help files.
B
Start printing from the application's [Print] dialog box.
Make sure to set more than two copies.
The Sample Print job is sent to the machine, and the first set is printed.
C
On the machine's control panel, press the {Printer} key to display the Printer
screen.
D
Press [Prt.Jobs].
E
Select [Sample Print Jobs] using {T} or {U}, and then press [Job List].
A list of Sample Print files stored in the machine appears.
Depending on the security settings, certain print jobs may not be displayed.
You can print files also by pressing [User ID]. For details, see p.108 “Printing
from the User ID Screen”.