Ricoh Aficio LD215c - Manual (Page 18)

10
D
Push down the paper guide release lever.
E
Set the paper size using the printer driver or the control panel.
Note
❒ Paper within the following dimensions can be set in the bypass tray:
• Vertical: 90 - 305 mm (3.55 - 12 in.)
• Horizontal: 148 - 600 mm (5.83 - 23.62 in.)
❒ Be sure to set the paper with the side you want to print facing up in the by-
pass tray.
❒ The number of sheets that can be loaded in the bypass tray depends on the
paper type.
Reference
For details about setting the paper size, see p.11 “Setting the Paper Size and
Paper Type of the Bypass Tray”.
For details about setting paper in the regular paper tray, see General Set-
tings Guide.
When loading custom size paper, see p.12 “Setting Custom Size Paper”.
When loading thick paper (over 90.2 g/m
2 ) or envelopes, set paper size
and paper type. For details, see p.14 “Setting Thick Paper or Envelopes”.
When loading letterhead paper, pay attention to its orientation. See Gener-
al Settings Guide.
ALZ039S