Printing with bluetooth connection, Supported profiles, P.56 “printing with bluetooth connection – Ricoh Aficio LD215c User Manual
Page 64: 1printing with bluetooth connection
Preparing the Machine
56
1
Printing with Bluetooth Connection
This describes how to print using with Bluetooth devices.
Supported Profiles
Refer the following supported profiles for Bluetooth connection.
❖ SPP, HCRP
• A maximum of two Bluetooth adaptor or Bluetooth-equipped computers
can be connected at the same time using the Bluetooth interface: one by
SPP, one by HCRP.
• When connecting more than one Bluetooth adaptor or Bluetooth-equipped
computer at the same time, the first device that establishes connection is se-
lected. When selecting the connection between the other devices, cancel
the first established connection.
• SPP connection does not support bidirectional communications.
• HCRP connection supports bidirectional communications.
❖ BIP
• For BIP connection, a module including PostScript 3 must be installed in
the machine.
• Only one Bluetooth adaptor or Bluetooth-equipped computer can be con-
nected via BIP.
• Only JPEG images that can be printed using BIP.
• User codes are disabled for BIP.
You cannot print if print functions are restricted.
• Some printers do not support BIP.
Note
❒ In this manual, the instruction referred to print using SPP. To print using
HCRP or BIP, see the Help supplied with the Bluetooth adapter you use.