Ricoh Aficio LD215c - Manual (Page 112)

Other Print Operations
104
3
Stored Print
Use this function to store a file in the machine, and then print it from the com-
puter or the machine's control panel later.
Jobs are not deleted after they are printed, so the same job need not be resent in
order to print multiple copies.
Important
❒ A Stored Print file cannot be stored if:
• the total number of Sample Print, Locked Print, Hold Print, and Stored
Print files in the machine is over 100. (The maximum number varies de-
pending on the volume of data in files.)
• the file contains over 1,000 pages.
• sent or stored files in the machine contain over 9,000 pages in total.
• using the machine with no Function Upgrade Option type C1500 installed.
Note
❒ If a Stored Print file has not been stored properly, check the error log on the
control panel (see p.116 “Checking the Error Log”).
❒ Even after you turn off the machine, stored documents remain. However, the
[Auto Delete Temporary Jobs] or [Auto Delete Stored Jobs] settings are applied first
(see “Printer Features”, General Settings Guide).
❒ If the application has a collate option, make sure it is not selected before send-
ing a print job. By default, Stored Print jobs are automatically collated by the
printer driver. If a collate option is selected from the application's Print dialog
box, more prints than intended may be produced.
❒ The files sent to the machine is not saved if you use the machine with no Func-
tion Upgrade Option type C1500 installed.