Ricoh Aficio LD215c - Manual (Page 26)

18
E
Set paper size using the printer driver and the control panel.
For details, see p.19 “Setting the Paper Size and Paper Type of the One Sheet
Bypass Tray”.
Note
❒ Paper within the following dimensions can be set in the One Sheet bypass
tray:
• Vertical: 90 - 305 mm (3.55 - 12 in.)
• Horizontal: 148 - 600 mm (5.83 - 23.62 in.)
❒ Be sure to set the paper with the side you want to print facing up in the One
Sheet bypass tray.
❒ The number of sheets that can be loaded in the One Sheet bypass tray de-
pends on the paper type.
Reference
For details about setting paper in the regular paper tray, see General Set-
tings Guide.
When loading custom size paper, see p.20 “Setting Custom Size Paper”.
When loading thick paper (over 90.2 g/m
2 ), OHP transparencies, or enve-
lopes, set paper size and paper type. For details, see p.22 “Setting Thick Pa-
per, OHP Transparencies, or Envelopes”.
When loading letterhead paper, pay attention to its orientation. See Gener-
al Settings Guide.