Using the remote control, Installing batteries in the remote control – Roland RG-7 User Manual
Page 33
32
Chapter 1. Playing Back Songs
Using the Remote Control
You can use the included remote control to easily start and stop performances and
switch songs. You can also use the remote control to select what is to be displayed
on an external screen or television set connected to the RG-7 and assign functions to
the buttons used in operating the remote control.
■
Installing Batteries in the Remote Control
Install the batteries provided in the remote control.
1.
Open the battery cover on the back of the remote control.
2.
Insert the supplied AA batteries, as shown in the figure of remote
control.
3.
Close the battery cover.
For more information on the
remote control button
functions, refer to “About the
Remote
Control’s
Cover
Remote Control (Rear)
NOTE
Be careful to observe
the correct polarity (+, -
direction) when installing
the batteries.
RG-7_e.book 32 ページ ２００５年２月１４日 月曜日 午前９時４５分