Roland RG-7 - Manual (Page 48)

47
Chapter 2. Using the RG-7 with an External Display
or Television
You can connect a computer monitor or other external display or a television to the
RG-7, enabling you to display the Song Select screen, your favorite images, song
lyrics, and notations on a larger screen.
For more information about external display settings, refer to “Selecting What is To
Be Displayed on the External Display or Television” (p. 50).
Connecting an External Display
Displays That Can Be Connected to This Instrument
In general, a great many of the VGA monitors and multiscan monitors that are
available on the market are compatible with this instrument. However, before you
connect any monitor, make sure it meets the following specifications:
■ Making the Connections
* To prevent malfunction and/or damage to speakers or other devices, always turn
down the volume, and turn off the power on all devices before making any
connections.
1
Turn off the power to the RG-7 and the display to be connected.
2
Use display cable (sold separately) to connect the display to the Ext
Display connector on the RG-7.
Resolution 640 x 480 pixels
Horizontal scan frequency 31.5 kHz
Vertical scan frequency 60 Hz
Connector 3-row, 15-pin D-Sub type
Signal Analog
You cannot simultaneously use both an external display and a television with the
RG-7. Moreover, neither the external display nor the television will be able to display
properly if both are connected at the same time.
When using an external display, connect the display to the Ext Display connector,
but do not connect a television to the Video Out connector.
If using a television, connect the television to the Video Out connector, but do not
connect any external display to the Ext Display connector.
You can switch screens with
the remote control. For details,
see “About the Remote
Control” (p. 34).
NOTE
Confirm that your display is
compatible with the
frequencies listed to the left.
Using a display that is not
compatible with the left
frequencies may result in
incorrect image output when
images move, and in certain
cases may even damage the
display.
NOTE
You cannot display
information or images with
an external display when a
television is connected to
the Video Out jack. To use
an external display, first
disconnect the television
from the Video Out jack,
then connect the external
display. External Display
RG-7’s Jack Panel
Ext Display Connector
D-sub 15 pin
(Mini)
D-sub 15 pin
(Mini)
Display Cable
(Sold separately)
RG-7_e.book 47 ページ ２００５年２月１４日 月曜日 午前９時４５分