Roland RG-7 - Manual (Page 74)

73
Chapter 3. Performance
Restoring the Factory Settings
(Factory Reset)
You can return the content stored with “Memory Backup” (refer to the previous
page) to their original factory settings. This operation is referred to as “Factory
Reset.”
1.
Press the [Function] (Exit) button so the indicator is lit.
2.
Press the [Song] (Select -) button or [ ] (Select +) button to display
the FACTORY RESET screen.
fig.
3.
Press the [Moving Key] button.
A confirmation message appears in the screen.
fig.
Pressing the [Function] (Exit) button at this point returns you to the original screen
without Factory Reset being executed.
4.
Press the [Moving Key] button once more.
Factory reset is executed.
When Factory Reset is finished, the display and buttons return to their normal
appearance.
NOTE
When you perform a Factory
Reset, all settings that have
been stored in memory up to
then are erased and reset to
their factory defaults.
When you want to restore the
content registered to the RG-
7’s User memory to the factory
condition, refer to “Initializing
the User Memory or USB
Memory” (p. 92).
NOTE
Never turn off the power
while “Executing...” is
displayed in the screen.
Doing so may corrupt the
RG-7’s memory and render it
unusable.
RG-7_e.book 73 ページ ２００５年２月１４日 月曜日 午前９時４５分