Roland RG-7 - Manual (Page 68)

67
Chapter 3. Performance
■ Changing the Keyboard’s Split Point
You can change the location where the keyboard is divided (the split point).
1
Press the [Function] (Exit) button, getting its indicator to light.
2
Press the [Song] (Select -) button or [ ] (Select +) button to display
the SPLIT screen.
fig.
3
Press the [Song] (Select -) button or [ ] (Select +) button to get the
value for “Split Point” to flash.
fig.
4
Press the [ ] (Value -) or [ ] (Value +) button to select the split
point.
You can set the split point within a range of B1 to B6.
This is set to “F 3” when the power to the RG-7 is switched on.
5
Press the [Function] (Exit) button so the indicator goes out.
RG-7_e.book 67 ページ ２００５年２月１４日 月曜日 午前９時４５分