Roland RG-7 - Manual (Page 98)

97
Chapter 7. Connecting External Devices
Connecting to Audio Equipment
You can connect audio devices to play the sound of the RG-7
through the speakers of your audio system, or to record your
performance on a recording device.
■ Connectors
Output Jacks (Main Output/Aux Output)
You can connect audio equipment using audio cables (sold
separately) and play the sounds from the RG-7 through the
speakers on the connected equipment, or record your
performances on a recording device.
If the input of the connected device is monaural, you must
use the L (Mono) jack.
Input Jacks
You can connect another sound generator, such as audio
equipment or an electronic instrument, using audio cables
(sold separately). Play the sounds from the connected device
through the speakers on the RG-7.
If the output of the connected device is monaural, you must
use the L (Mono) jack.
* You cannot use the RG-7 to adjust the volume of the connected
sound generating device.
About the Output jack
922
This instrument is equipped with balanced (XLR) type jacks.
Wiring diagrams for these jacks are shown below. Make
connections after first checking the wiring diagrams of other
equipment you intend to connect.
■ Making the Connections
NOTE
To prevent malfunction and/or damage to speakers or other
devices, always turn down the volume, and turn off the power
on all devices before making any connections.
Playing Sounds from the RG-7 Through the
Speakers on Audio Equipment or Recording
Your Performances on a Recording Device
fig.09-
1. Turn the volume all the way down on the RG-7 and on
the device you’re about to connect.
2. Turn off the power to the RG-7 and other connected
equipment.
3.
Use audio cables (sold separately) to make the
connection.
4. Switch on the RG-7.
5. Switch on the connected device.
6.
Adjust the volume level on the RG-7 and the connected
device.
→ You can adjust the volume of a connected sound module with
the RG-7.
Recording RG-7 Performances on a Recording Device
7. Start recording with the connected device.
8. Play the keyboard.
9. When the performance ends, stop recording on the
connected equipment.
Turning off the power
1.
Set the volume of the RG-7 and of the connected
devices to the minimum position.
2. Turn off the connected equipment.
3.
Turn off the power to the RG-7.
Input R/L
(Line In, Aux In)
RG-7 Jack Panel
RG-7_e.book 97 ページ ２００５年２月１４日 月曜日 午前９時４５分