Roland RG-7 - Manual (Page 59)

58
Chapter 3. Performance
■ Producing the Resonance of the Strings When
the Keys Are Played (String Resonance)
When you play the keys on an acoustic piano, the strings that are already playing
resonate as well. The function that reproduces this effect is called “String
Resonance.”
1
Press the [Function] (Exit) button, getting its indicator to light.
2
Press the [Song] (Select -) button or [ ] (Select +) button to display
the RESONANCE screen.
fig.
3
Press the [Song] (Select -) button or [ ] (Select +) button to get the
value for “String” to flash.
fig.
4
Press the [ ] (Value -) or [ ] (Value +) button to change the value.
5
Press the [Function] (Exit) button so the indicator goes out.
Value Description
0–9
The resonance level decreases as the value is decreased,
while increasing the value increases the amount of
resonance.
The String Resonance function is not active when the
value is set to “0.”
You can save this setting in the
RG-7’s memory using the
Memory Backup function (p.
72).
NOTE
This setting is enabled only
with the piano tones. You
cannot set this for other tones.
RG-7_e.book 58 ページ ２００５年２月１４日 月曜日 午前９時４５分