Roland RG-7 - Manual (Page 69)

68
Chapter 3. Performance
Adding Reverberation to the Sound
(Reverb)
Apply a reverb effect to the notes you play with the RG-7.
Reverb makes it sound as if you are playing in a concert hall.
1.
Press the [Function] (Exit) button so the indicator is lit.
2.
Press the [Song] (Select -) button or [ ] (Select +) button to display
the EFFECT screen.
fig.
3.
Press the [Song] (Select -) button or [ ] (Select +) button to get the
value for “Reverb” to flash.
fig.
4.
Press the [ ] (Value -) button or [ ] (Value +) button to change the
amount of reverb applied.
5.
Press the [Function] (Exit) button so the indicator goes out.
Value Description
0–127
Increasing the value results in a deeper reverb effect.
No reverb is applied when the value is set to “0.”
You can save this setting in the
RG-7’s memory using the
Memory Backup function (p.
72).
RG-7_e.book 68 ページ ２００５年２月１４日 月曜日 午前９時４５分