Roland RG-7 - Manual (Page 49)

48
Chapter 2. Using the RG-7 with an External Display or Television
3
Switch on the RG-7.
4
Switch on the connected display.
Turning the Power Off
After use, turn off the power using the following procedure.
1
Turn the volume all the way down on the RG-7.
2
Turn off the RG-7.
3
Turn off the connected display.
■ Changing the Display Settings
1.
Press the [Function] (Exit) button so the indicator is lit.
2.
Press the [Song] (Select -) button or [ ] (Select +) button to display
the EXT DISPLAY screen.
fig.
3.
Press the [Song] (Select -) button or [ ] (Select +) button so that the
display setting is flashing.
fig.
4.
Press the [ ] (Value -) button or [ ] (Value +) button to select
“VGA.”
5.
Press the [Function] (Exit) button so the indicator goes out.
Images are now displayed in the screen of the connected external display.
When you press the [DISPLAY] button on the remote control, the content being
displayed switches to the external display.
To change the settings indicated in the display (Song Select screen → Lyrics screen →
Slide show → Notation → Song Select screen...), refer to “Selecting What is To Be
Displayed on the External Display or Television” (p. 50).
For more on handling the
external display, refer to your
display’s owner’s manual.
You can save this setting in the
RG-7’s memory using the
Memory Backup function (p.
72).
RG-7_e.book 48 ページ ２００５年２月１４日 月曜日 午前９時４５分