Ricoh Aficio 470W - Manual (Page 106)

Copying
86
2
Background Numbering
The optional stamp board and HDD are required to use this function.
This function produces copies which
have been stamped by the numbering
user stamp.
Preparation
You can set the start number from
1 to 999.
Note
❒ You can change the density of the
background numbers. See P.137
“Background Numbering Format”
❒ You can change the size of the
background numbers. See P.137
“Background Numbering Format”
❒ You can combine this function
with other (up to two) print func-
tions.
A
Press the [ Stamp ] key.
B
Press the [ Background Numbering ]
key.
C
Enter the start number with the
number keys, and then press the
[ OK ] key.
Note
❒ To change the value, press the
{Clear/Stop} key, and then enter
the new value.
D
Press the [ OK ] key.
ZEDG190E