Ricoh Aficio 470W - Manual (Page 52)

Copying
32
2
Note
❒ Release the original when it is
pulled slightly into the ma-
chine.
❒ To stop originals being fed into
the machine, press the
{Scanner
Stop
} key.
❒ When you press the {Scanner
Stop
} key, the original stops im-
mediately, which can cause the
original to jam. If this happens,
see P.117 “
xClearing Misfeeds”
❒ When you have used the [ Rear
(Straight) ] key to specify the orig-
inal output location, the rear
edge of the originals are hold at
the output exit. You can cancel
this by pressing the
{Scanner
Stop
} key. See P.22 “Switching
the Original Exit”
❒ You can change the original
feed delay setting if originals
are repeatedly fed at a slant or if
you need to adjust the delay for
the type of originals you are us-
ing. See "Original Feed Delay 1"
in the System Settings manual.
❒ If the leading edge of the origi-
nal is badly curled, smooth out
the curl and place the original in
the insertion area.
❒ When inserting long length
originals, there may be some
movement to either side. If this
occurs, correct the movement
manually while feeding the
original into the machine.
Setting Carrier Sheet
Important
❒ When using the carrier sheet, set
the original output location to
original output (rear (straight)). If
the original output location is set
to
[ Upper ] or [ Document Roller ] , the
original may be damaged.
Note
❒ When using the carrier sheet and
Synchro Cut is selected, the paper
is cut to the size of the carrier sheet.
Reference
For details about using. The carrier
sheet to make copies see P.13
“Originals that should be scanned us-
ing the carrier sheet”
A
Open the carrier sheet with the
transparent sheet face up and
then insert the original also face
up.
Note
❒ Align the original with the fold
of the carrier sheet.
ZEDP020E