Ricoh Aficio 470W - Manual (Page 50)

Copying
30
2
Auto Reset
The machine returns to its initial con-
dition automatically after your job is
finished, after a certain period of
time. This function is called "Auto Re-
set".
Note
❒ The default settings that after Auto
Reset, or after the
{Clear Modes/En-
ergy Saver
} key has been pressed, is
as follows.
*1 : Density Priority setting can be
changed
*2 : Paper Roll Priority setting can be
changed
❒ You can store the settings you
want to use as the default settings
for the Initial Screen in Program
No. 20. See P.126 “Initial Mode Set”,
P.53 “Program”
❒ You can change the Auto Reset
time. See P.126 “Copier Reset Timer”
❒ In some cases Auto Reset will not
reset the settings.
• If a paper roll tray is open
• If there is an original or paper
jam
• If a cover is open
• If copying has been interrupted
• During copying (if only one
original has been inserted when
using Image Overlay)
• During copying (if there is no
paper in the bypass tray after a
manual copy original has been
scanned)
• When the "PLEASE WAIT" is
displayed (such as while the
machine is warming up)
Auto Off
The machine turns itself off automat-
ically after your job is finished, after a
certain period of time. This function is
called "Auto Off".
Note
❒ You can change the Auto Off time.
For Auto Off time setting, see "Au-
to Off Timer" of the "System Set-
tings" manual.
❒ In some cases the machine will not
automatically turn itself off.
• If there is an original or paper
jam
• If a cover is open
• If copying has been interrupted
• During copying (if only one
original has been inserted when
using Image Overlay)
• During copying (if there is no
paper in the bypass tray after a
manual copy original has been
scanned)
• When the "PLEASE WAIT" is
displayed (such as while the
machine is warming up)
Auto Image Density On
Combined Auto and
Manual Density On *1
Default image den-
sity Centre
Synchro Cut On
Selected paper roll Paper Roll 1 *2
Full size On