Ricoh Aficio 470W - Manual (Page 81)

Fine Magnification
61
2
Fine Magnification
Paper can expand or shrink be affect-
ed, which can result in copies where
size of the original and the copy do
not match (such as under humid con-
dition). This function uses the mea-
surements of the original and the
copy to calculate a ratio to produce
copies that are close to actual size.
Note
❒ Fine Magnification is used for orig-
i n al s t h at h av e a lre ady b een
scanned. If you want to perform
fine magnification corrections to
paper that has stretched due to the
type of paper or exposure to hu-
mid conditions, see "Fine Magnifi-
cation: Copier" in the System
Settings manual.
❒ Set the correction ratio after mea-
suring the length and width of the
original and the copy.
❒ When Fine Magnification is select-
ed, depending on the pattern of
original, moire patterns may be
noticeable or the image quality
may deteriorate.
A
Press the [ Reduce/Enlarge ] key.
B
Press the [ Fine Mag. ] key.
C
Select the paper type you want to
correct, then adjust the horizontal
and vertical ratio using the
[ - ] and
[ + ] keys.
Note
❒ If you make a mistake, press the
[ Cancel ] key, and then repeat the
procedure again.
B
ZEDG010E
Calculating the Correction Value (%)
To copy at the same size as the original
Example)
Copy Original
Horiz. Horiz.
... For the example above:
correction value(%)
Set the correction value (horizontal) to 0.8%.