Ricoh Aficio 470W - Manual (Page 77)

Partial Copy
57
2
Partial Copy
Copies only a specified portion of the
original.
Reference
You can specify the start position
(Y1) and the end position (Y2). See
P.130 “Partial Copy Priority”
A
Press the
{{{{Sample Copy/Partial
Copy
}}}} key.
B
Press the [ Partial Copy ] key.
C
Press the [ Y2 ] key, and then enter
the scan end position with the
number keys.
Note
❒ To change the value entered,
press the
{Clear/Stop} key and
enter the new value.
❒ The minimum length for Partial
Copy is 210mm (8.3") (250mm
(9.8") for paper roll 3). Enter a
value for Y2-Y1> that specifies a
length of at least 210mm (8.3")
(250mm (9.8") for paper roll 3).
❒ If the length specified by [ Y2 ]
and [ Y1 ] is less than 210mm, the
machine adjusts the start posi-
tion based on the last number
you entered.
D
Press the [ Y1 ] key, and then enter
the scan start position.
E
Press the [ OK ] key.
F
Make your desired settings.
Reference
For details, see explanations of
each function.
G
Place your originals.
The machine makes a copy of the
specified area.
Exiting Partial Copy
A Press the {{{{Clear Modes/Energy
Saver
}}}} key.
ZEDS081E