Ricoh Aficio 470W - Manual (Page 68)

Copying
48
2
Setting the Length of Copy Paper Cut
Preparation
The following paper cut methods
are available.
❖ ❖ ❖ ❖ Synchro Cut
Cuts the paper at the same
length as the original.
If the copy is enlarged or re-
duced, the machine calculates
the appropriate length for the
magnification ration and cuts
the paper.
❖ ❖ ❖ ❖ Preset Cut
Cuts the paper at a preset size,
regardless of the size of the orig-
inal. You can use this to copy
different sized originals to the
same size.
❖ ❖ ❖ ❖ Variable Cut
The paper is cut to the size en-
tered.
Important
❒ Except for Synchro Cut, the paper
is cut regardless of the size of the
original.
❒ The maximum length paper copy
depend on the paper type and
width.
❖ ❖ ❖ ❖ Metric version
❖ ❖ ❖ ❖ Inch version (Engineering)
❖ ❖ ❖ ❖ Inch version (Architecture)
Synchro Cut
Note
❒ When using Synchro Cut the paper
can be cut from 200 to 6000 mm
(7.9" to 236") (from 250 to 6000 mm
(9.8" to 236") for paper roll 3).
Limitation
❒ Depending on the original length
and the paper, the paper may be
cut error.
Paper
width
841
mm 594
mm 420
mm 297
mm
Paper
type
Plain 6000
mm 3600
mm 2000
mm 2000
mm
Translu-
cent paper 3600
mm 3600
mm 2000
mm 2000
mm
Film
Paper
width
34" 22" 17" 11"
Paper
type
Plain 236" 142" 78.7" 78.7"
Translu-
cent paper
(vellum) 142" 142" 78.7" 78.7"
Film
Paper
width
36" 24" 18" 12"
Paper
type
Plain 236" 142" 78.7" 78.7"
Translu-
cent paper
(vellum) 142" 142" 78.7" 78.7"
Film