Ricoh Aficio 470W - Manual (Page 128)

Troubleshooting
108
3
The background for translu-
cent paper (vellum) is dirty. More than 50 copies are being
made of originals longer than
1189mm (46.9") with solid
block of color (2mm
×
900mm
(0.08"
×
35.4") or larger.)
Adjust the fuser setting to
match the paper type. See
"Fusing Adjustment: Paper
Tray" in the System Settings
manual.
Streaks, scratches, or wrinkles
appear in areas of solid black
color. The paper has been changed
from plain paper to translu-
cent paper (vellum), or from
translucent paper (vellum) to
plain paper. After switching from plain pa-
per
→
to translucent paper
(vellum) wait one minute. Af-
ter switching from translucent
paper (vellum)
→
to plain pa-
per wait two minutes before
making copies.
Shadows appear on the cop-
ies. The original is a two sided
original, or image density set-
ting is too dark. Adjust the image density set-
ting. See P.41 “Adjusting Copy
Image Density”
The copies are blurred. Continuous copies have been
made on small sized paper. Wait about two minutes, and
then try copying again.
Problem Cause Action