Ricoh Aficio 470W - Manual (Page 51)

Setting Originals
31
2
Setting Originals
Note
❒ Place the original after correction
fluid and ink has completely dried.
Not taking this precaution could
mark the exposure glass and cause
marks to be copied.
❒ Dust and residue from originals
drawn with a pencil can mark the
exposure glass and cause marks to
be copied. We recommend using
the carrier sheet for this type of
original.
❒ If the rear edge of the original is
badly curled, smooth out the curl
with both hands before scanning
the original. If the original is insert-
ed as it is, it may be damaged.
❒ When copying curled originals,
use the copy output (front) auxilia-
ry tray.
❒ Do not use force to push the side
fence of the original guides.
Reference
For details about precautions with
originals, see P.13 “Originals”
A
Adjust the original guides to the
size of the paper width.
Note
❒ Make sure that the original
guides are not too tight.
B
Carefully place the original be-
tween the original guides, using
both hands, with the side to cop-
ied face up.
Important
❒ Do not release your hands until
that the original is pulled into
the machine.
❒ Once the originals start to feed
into the machine, do not push or
pull them. This may damage
your originals,
❒ If the originals are fed at a slant
or become jammed, press the
{Scanner Stop} key.
❒ Do not operate the document
roller while originals are being
fed through the machine. This
may damage your originals,
ZEDH190E
ZEDH180E
ZEDH150E