Ricoh Aficio 470W - Manual (Page 57)

Job Preset
37
2
Job Preset
If a long copy job is in progress and
you do not wish to wait for it to finish,
you can use this function to set up the
next copy job in advance. When the
current copy job is finished, your
copy job will be started automatically.
Limitation
❒ Job preset is one job for one original.
❒ The number of jobs that can bis-
tered for Job Preset and each paper
size is as follows:
*1 Depending on the function set-
tings, you may be able to store
more originals.
❒ You cannot use the following func-
tions with Job Preset. Make the set-
tings when the current copy job
has finished.
• Recalling a Program
• Interrupt Copy
• Copying From The Bypass Tray
• Sort
• Image Overlay
• Double Erase
• Image Repeat
• Preset Stamp
• User Stamp
• User Stamp Repeat
• Sample Copy
• Partial Copy
❒ You cannot preset a job while a job
is being sorted.
❒ The maximum number of jobs that
can be preset is 99.
❒ Depending on the size of original,
you may not be able to preset more
jobs even if have not reached the
maximum.
❒ You can select the paper for Job
Preset, but if the paper for the pre-
vious job was set to Plain, Film, or
the Fusing mode setting for Trans-
lucent paper (vellum) was set to 1
or 2, the fusing mode setting will
not be used. In these cases, make
the copies after Job Preset has fin-
ished. See "Fusing Adjustment: Pa-
per Tray" in the System Settings
manuals.
A
Press the [ Job ] key while the mes-
sage "Copying..." is displayed.
Note
❒ You can specify the number of
originals or jobs that can be
scanned for Job Preset.
❒ If the number of jobs is full, you
cannot preset any more jobs
even if memory is still available.
For details about the memory
display, see P.128 “Memory Sta-
tus Display”.
Standard Optional HDD
installed
A0(E) — 49 jobs *1
A1(D) 1 job 99 jobs
A2(C) 3 jobs 99 jobs
A3(B) 7 jobs 99 jobs
A4(A) 15 jobs 99 jobs