Roland Sonar V-Studio VS-700 - Manual (Page 111)

111
Creating a Patch
O
v
er
vie
w
C
onnec
tions
V
S-700C C
onsole
V
S-700R I/O
F
a
n
tom V
S
A
p
pendix
Cutoff V-Sens (Cutoff Velocity Sensitivity)
Use this parameter when changing the cutoff frequency to
be applied as a result of changes in playing velocity. If you
want strongly played notes to raise the cutoff frequency, set
this parameter to positive (+) settings. If you want strongly
played notes to lower the cutoff frequency, use negative (-)
settings.
Value: -63– +63
To edit the overall patch while preserving the relative
differences in the Cutoff Frequency Velocity Sensitivity
values set for each tone, set the Velocity Sens Offset
parameter (p. 99). However, this setting is shared by the
Level V-Sens parameter (p. 113).
Resonance V-Sens
(Resonance Velocity Sensitivity)
This allows keyboard velocity to modify the amount of
Resonance. If you want strongly played notes to have a
greater Resonance effect, set this parameter to positive (+)
settings. If you want strongly played notes to have less
Resonance, use negative (-) settings.
Value: -63– +63
Patch TVF Env (Patch TVF Envelope)
F-Env Depth (TVF Envelope Depth)
Specifies the depth of the TVF envelope. Higher settings will
cause the TVF envelope to produce greater change. Negative
(-) settings will invert the shape of the envelope.
Value: -63– +63
F-Env V-Curve (TVF Envelope Velocity Curve)
Selects one of the following 7 curves that will determine how
keyboard playing dynamics will affect the TVF envelope. Set
this to “FIX” if you don’t want the TVF Envelope to be affected
by the keyboard velocity.
Value: FIX, 1–7
fig.06-036
F-Env V-Sens (TVF Envelope Velocity Sensitivity)
Specifies how keyboard playing dynamics will affect the
depth of the TVF envelope. Positive (+) settings will cause the
TVF envelope to have a greater effect for strongly played
notes, and negative (-) settings will cause the effect to be less.
Value: -63– +63
F-Env T1 V-Sens
(TVF Envelope Time 1 Velocity Sensitivity)
This allows keyboard dynamics to affect the Time 1 of the TVF
envelope. If you want Time 1 to be speeded up for strongly
played notes, set this parameter to a positive (+) value. If you
want it to be slowed down, set this to a negative (-) value.
Value: -63– +63
1 2 3 4 5 6 7
VS-700_r_e.book 111 ページ ２００８年１１月２０日 木曜日 午後２時２８分