Settings for sonar, Turning the v-link on/off 1, V-link parameters – Roland Sonar V-Studio VS-700 User Manual

Page 170

Advertising

170

About V-LINK

Settings for SONAR

Insert a MIDI track somewhere other than in the project, and make the following driver settings for the input and

output. Next, turn on

the [Input Echo] button of the MIDI track. Once set up this way, you’ll be able to record and

play back V-LINK data in SONAR.

Turning the V-LINK ON/OFF

In the left of the panel, press [V-LINK] so the indicator is lighted.

The V-LINK setting will be on.

When the V-LINK button is lighted, you’ll be able to carry out video control in keeping with operations performed on

the VS-700C.

will function on behalf of the V-LINK feature (switching video clips).

Press [V-LINK] again.

The V-LINK button will go out, and the V-LINK setting will be off.

V-LINK Parameters

Port

Driver

MIDI Input

V-LINK (VS-700)

MIDI Output

IO MIDI (VS-700)

VS-700C Controller

V-LINK Control

Transmitted MIDI Message

FR BALL