Roland Sonar V-Studio VS-700 - Manual (Page 85)

85
O
v
er
vie
w
C
onnec
tions
V
S-700C C
onsole
V
S-700R I/O
F
a
n
tom V
S
A
p
pendix
Compressor Parameters
Digital compressors are built into the eight audio inputs (INPUT 1–8).
If you’re using SONAR, you can edit the compressor parameters as described below.
If you’re using software other than SONAR, use “VS-700R I/O Editor” which is included on the “SONAR V-
STUDIO 700 CD-ROM.”
1. From SONAR’s “Tools” menu, open “VS-700.”
2. Select the “MIC PRE” tab.
3. Apply the desired compressor settings.
These settings are not stored in the VS-700.
You can use the channel strip rotary encoders to control the Mic Pre Gain, Threshold ,Attack and Release
parameters on the VS-700R I/O. For details, refer to “I/O Control” (p. 44).
Setting Screen label Range Default Explanation
Comp switch COMP OFF, ON OFF Enables the compressor.
Threshold THRES -60–0 dB -20 dB
Specifies the signal level at which the compressor
will be applied.
Ratio RATIO
1:1.0,
1:1.1,
1:1.2,
1:1.4,
1:1.6,
1:1.8,
1:2.0,
1:2.5,
1:3.2,
1:4.0,
1:5.6,
1:8.0,
1:16,
1:INF
1:4.0
Specifies the compression ratio by which the
audio signal will be compressed.
Attack time ATK 0–100 Actual value (0.2–100 ms)
Release time REL 0–100 Actual value (10–500 ms)
Gain GAIN -30–30 dB 0 dB Adjusts the output level of the compressor.
VS-700_r_e.book 85 ページ ２００８年１１月２０日 木曜日 午後２時２８分