Roland Sonar V-Studio VS-700 User Manual
Page 72
72
RECORD/EDIT Section
To Specify the Punch Region
1.
Select transport mode (p. 58).
2.
Hold down the [SHIFT] button and press the [PUNCH] button. The [PUNCH] and [
] buttons will
blink.
3.
Use the jog/shuttle and cursor to move to the punch-in point.
4.
Press the [
] button. The [PUNCH] and [
] buttons will blink.
5.
Use the jog/shuttle and cursor to move to the punch-out point.
6.
Press the [PUNCH] button.
To Punch-Record
1.
Press the [PUNCH] button. The [PUNCH] button will light.
2.
Press the [ARM] button for the track that you want to punch-record. The [ARM] button will light
red.
3.
Press the
button to start recording.
4.
When you’ve finished recording, press the
button to stop recording.
To Loop
1.
Press the [LOOP] button. The [LOOP] button will light.
VS-700_r_e.book 72 ページ ２００８年１１月２０日 木曜日 午後２時２８分