Ricoh PRIPORT JP1250 - Manual (Page 102)

What to do If Something Goes Wrong
82
5
R CAUTION:
Note
❒ To prevent misfeeds, do not leave any torn scraps of paper within the ma-
chine.
❒ When clearing misfeeds, do not turn off the main switch. If you do, your copy
settings are cleared.
❒ If misfeeds occur repeatedly, contact your service representative.
❖ ❖ ❖ ❖ When the open cover/unit indicator ( M M M M ) lights
❖ ❖ ❖ ❖ When the supply/exchange indicators light
❖ ❖ ❖ ❖ When other indicators light
• Be careful not to cut yourself on any sharp edges when you reach inside the
machine to remove misfed sheets of paper or masters.
Monitor Guidance Display and Action Page
M
CLOSE THE COVER
• Close the original tray unit.
• Close the front door.
⇒
P.97 “When the Open Cover/Unit In-
dicator ( M) Lights”.
CLOSE THE PLOTTER COVER
• Close the right side cover and
the plotter cover.
CLOSE THE ADF COVER
• Close the optional ADF unit.
⇒
P.97 “When the Open Cover/Unit In-
dicator ( M) Lights”.
SET THE DRUM COMPLETELY
Monitor Guidance Display and Action Page
B
LOAD MORE PAPER
⇒ P.73 “Loading Paper on the Paper
Feed Tray”.
j
LOAD NEW INK CARTRIDGE
⇒
P.75 “When the Add Ink Indicator
( j) Lights”.
C
LOAD NEW MASTER ROLL
⇒
P.77 “Master Roll Replacement”.
k
EMPTY MASTER EJECT BOX
• Remove the used master.
⇒
P.99 “When the Master Eject Indica-
tor ( k) Lights”.
SET THE MASTER EJECT BOX
Monitor Guidance Display and Action Page
u
SET THE KEY COUNTER
⇒ P.100 “When Other Indicators
Light”.
SilverV-gb.book Page 82 Monday, May 15, 2000 3:32 PM