Ricoh PRIPORT JP1250 - Manual (Page 33)

Fine Mode—Making Clear Prints
13
1
Fine Mode—Making Clear Prints
Use the { Fine } key to make clear
prints.
A
Press the
{{{{
Fine
}}}} key to select Fine
mode.
B
Set your originals on the exposure
glass or in the optional document
feeder.
C
Press the
{{{{
Start
}}}} key. Check the
image position of the trial or
proof print.
Note
❒ If the image position is not cor-
rect, adjust it using the { Image
Position } keys (see ⇒
P.9 “Ad-
justing the Print Image Position”)
or the side tray fine adjusting
dial (see
⇒
P.10 “Shifting the
Print Image Position to the Right
or Left”).
D
Enter the number of prints with
the number keys.
E
Press the
{{{{
Print
}}}} key.
TSLS012E
TSLS014E
SilverV-gb.book Page 13 Monday, May 15, 2000 3:32 PM